OMTech K40 is a feature-packed machine and has a water pump to cool the laser head while in operation. However, to overcome this, OMTech DF0812-40BG comes with a red dot pointer to indicate the engraving area. The laser head is a 40 W CO 2 unit that has a lifespan of 2,000 hours when used at low power settings and can work for around 400 hours when used at maximum power.ĬO 2 laser tubes produce a laser beam that is not visible to the naked eye, making it difficult to position the workpiece on the workbed accurately. You can achieve a maximum engraving resolution of 1,500 dpi using recommended settings. It also features an emergency stop button to stop the laser immediately in case of emergencies. It has a control panel that you can use to set laser power and view laser temperature. The machine is completely enclosed, making it safe to operate and it has a transparent window on the top to let you view the engraving process. It can house workpieces with a maximum thickness of around 2.5". OMTech K40 has a 12" x 8" work area and a footprint of 32" x 20" x 10" with a weight of around 51 lbs. The maximum speed is based on straight-line transmissions so the actual speed will be far less. However, when it comes to non-metals, it can cut relatively thicker material than most diode lasers on the market.ĭepending on the material you are processing, you can achieve a maximum engraving speed of 1000 ipm. The 40W laser engraver is an affordable entry-level machine from OMTech that can engrave on a variety of materials like acrylic, glass, Delrin, leather, ceramic, fiberglass, anodized aluminum, plastic, cork, and more.Īlthough its CO 2 laser head is more powerful than most diode laser engravers, it cannot be used to engrave on metals as the wavelength of CO 2 lasers is not readily absorbed by metal surfaces. Orion Motor Tech or OMTech, is headquartered in California and is well-known for producing reliable laser engravers of various ranges. I've personally tested the xTool P2 on various materials, and you can read my detailed review of P2 to see how it performed. The xTool P2 comes with a one-year warranty, and you can upgrade this warranty by purchasing xTool Care's extended warranty service. XTool Creative Space is compatible with Windows, MacOS, and iPadOS, while LightBurn works on Windows, MacOS, and Linux. The xTool P2 supports xTool Creative Space (XCS) and LightBurn control software, allowing you to work with file formats like SVG, DXF, JPG, JPEG, PNG, BMP, etc. The machine also has an exhaust fan and a massive radiator with three fans at the back to provide better performance. XTool P2 comes equipped with an air pump and water pump, which includes an air-assist system that allows you to adjust the air pressure from 2.175 - 21.75 psi.Īdditionally, the machine features a water level and temperature sensor to monitor the water supply. This transmission provides the xTool P2 with a processing accuracy of 0.01mm and a speed of 600mm/s. The machine's X and Y axes are driven by belt-driven transmission, while the Z-axis uses a motorized leadscrew drive to provide autofocus capability. Unfortunately, you'll have to buy their automatic conveyor feeder separately to feed the workpiece automatically.įor business owners working on large workpieces, the automatic conveyor feeder can be a valuable add-on. One of the most impressive features of the xTool P2 is its passthrough capability, allowing you to slide long workpieces through the machine's work area for cutting or engraving. It is a powerful machine that can work on a wide range of materials, including wood, paper, acrylic, leather, anodized aluminum, etc.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |